To removeTo remove  - Installing a child restraint system to the lower anchorage (ISOFIX child restraint 
mountings) and tether anchorage - Child restraint - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Remove the child restraint in accordance with the instructions provided by the child restraint system’s manufacturer.

    See also:

    Wheel covers
    To removeWrap the tip of the jack bar with a cloth, insert it deeply into the notch provided in the wheel cover, and pry the cover away from the wheel. Using the same procedure at the other wheel ...

    Alarm activation
    The turn-signal lamps blink and the siren sounds for approximately 30 seconds. Refer to “Alarm activation”. Note ► The alarm will resume if unlawful actions are taken again, even if the ...

    Front passenger’s airbag OFF indication lamp
    The front passenger’s airbag OFF indication lamp is located in the instrument panel. The indicator normally illuminates when the ignition switch is turned to the “ON” position or the oper ...