Active Stability Control (ASC) OFF display screenActive Stability Control (ASC) OFF display screen  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This is displayed when the Active Stability Control (ASC) is turned off with

This is displayed when the Active Stability Control (ASC) is turned off with the ASC OFF switch.

If there is a fault with the ASC, the ASC OFF display is shown.

Refer to ““ASC OFF” switch”.

    See also:

    Washer fluid
    Check the washer fluid level in the container. If the level is low, replenish as required. NOTE The washer fluid container serves the windscreen, rear window, and headlamps (if so equipped). ...

    At extreme cold ambient temperature
    If the engine won’t start, depress the accelerator pedal about halfway while cranking the engine. Once the engine starts, release the accelerator pedal. CAUTION When starting the engine, make su ...

    Setting the system
    Follow the procedure below to set the system to the system armed mode. 1. Except for vehicles equipped with the keyless operation system, remove the key from the ignition switch. For vehicles equip ...