Instruments and controls

See also:

Welcome light
This function turns on the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on the remote control transmitter is pressed when the combination headlamps and dipper switch is ...

Wiper blades
Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer wipe properly. (Refer to page 9–18) ...

Changing the security alarm settings
It is possible to set the security alarm to the “active” mode or “inactive” mode. Follow the procedure below. 1. Turn the ignition switch to the “LOCK” position. If you started the engi ...