Parking
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on an uphill) or reverse (on a downhill) position on manual transmission vehicle. On automatic transmission vehicle, move the selector lever to “P” position. When parking on a hill, apply chocks to wheels for greater safety.
Parking with the engine running
Do not keep the engine running in a closed or poorly ventilated place. Carbon monoxide gas is odorless and extremely poisonous and dangerous.
Where you park
Do not park in a place where there are inflammable objects such as dry grass, leaves, etc... because the exhaust system with catalyst produces very high temperatures. This may cause a fire.
When leaving the vehicle
Always remove the key from the ignition switch and lock all doors when leaving the vehicle unattended.
Always try to park your vehicle in a well lit area.
See also:
Vehicle labeling
Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the
illustration.
Vehicle information code plate
The vehicle information code plate is riv ...
Parking
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake, and then move the gearshift lever to the “P” (PARK) position.
If you are going to leave the vehicle unatt ...
Passing acceleration
To gain extra acceleration in “D” (DRIVE) position, push the accelerator to the
floor. The Twin Clutch SST will automatically downshift.
Note
► In manual shift, downshifts do not take p ...