Headlamp levelling

See also:

Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove the socket assembly and bulb together by turning it anticlockwise, and then remove the bulb by pulling out. NOTE ...

Force limiter system
In the event of a collision, each force limiter system will effectively absorb the load applied to the seat belt to minimize the impact to the passenger. ...

Cargo room lamp
When replacing the bulb, put the cargo room lamp switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly ...