Automatic headlamp levellingAutomatic headlamp levelling - Headlamp levelling - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This mechanism automatically adjusts the direction of the headlamps (beam position) depending on changes in the condition of the vehicle, such as the number of occupants or luggage weight. When the headlamps are illuminated with the ignition switch in the “ON” position, the beam position of the headlamps is automatically adjusted when the vehicle is stopped.

Headlamp automatic levelling system warning display

If there is a fault in the automatic headlamp levelling system, the warning display

If there is a fault in the automatic headlamp levelling system, the warning display is displayed on the information screen in the multi-information display.

► If the warning is displayed, the system may be malfunctioning. Have the Caution

► If the warning is displayed, the system may be malfunctioning. Have the vehicle inspected at a MITSUBISHI MOTORS Authorized Service Point.

    See also:

    Average speed
    For vehicles with MITSUBISHI genuine audio, average speed can be displayed. This value shows the average speed (in km/h or mph) since the display was reset. If you reset the display at the time ...

    Operation of the Dead Lock System
    With a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the driver’s or front passenger’s door lock/unlock switch, or the rear hatch LOCK switch. (Refer to ...

    Driver’s seat belt warning lamp and display
    Warning lamp A tone and warning lamp are used to remind the driver to fasten the seat belt. If the ignition switch is turned to the “ON” position or the operation mode is put in ON while a ...