Indication lampsIndication lamps - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.) Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts yet. 2 ...

TP (Traffic information Program) search function
The traffic information program standby function is turned on (with the TP indicator (11) shown on the display) and after about 45 seconds since the RDS indicator (9) turns off due to weak signal ...

Reversing sensor system detection areas
Depending on whether the vehicle is equipped with a towing bar, you can change the reversing sensor system between the standard mode and the towing bar mode. The towing bar mode changes the system ...