Wiper and washer switchWiper and washer switch  - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

► If the washer is used in cold weather, the washer fluid sprayed against Caution

► If the washer is used in cold weather, the washer fluid sprayed against the glass may freeze, which may hinder visibility.
Warm the glass with the defroster or rear window demister before using the washer.

See also:

Wheel covers
To remove Wrap the tip of the wheel nut wrench with a cloth, insert it at the edge of the wheel cover, and pry the cover away from the wheel. NOTE The wheel cover is made of plastic; take care ...

Automatically stopping the engine
The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go ...

Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch SST control mode switch (A) to change the control mode. When the engine is started, the control mode is automatic ...