Warning lampsWarning lamps - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Changing the security alarm settings
It is possible to set the security alarm to the “active” mode or “inactive” mode. Follow the procedure below. 1. Turn the ignition switch to the “LOCK” position. If you started the engi ...

Bulb capacity
When replacing a bulb, use a new bulb with the same wattage and colour. Outside Except for vehicles equipped with high intensity discharge headlamps 1. Front turn-signal lamps: 21 W (WY21W) 2. H ...

Welcome light
This function turns on the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on the remote control transmitter is pressed when the combination headlamps and dipper switch is ...