Information screen displayInformation screen display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Tips for starting
(1) Do not operate the starter motor continuously for anything longer than 10 seconds; doing so could run down the battery. If the engine does not start, turn the ignition switch back to “LOCK ...

Automatic mode
The automatic adjustment mode can set the local time automatically by using the signal from local RDS stations. In this mode, CT (A) is shown in the display. Refer to “Radio data system (RDS)” ...

Engine coolant
A translucent coolant reserve tank is located in the engine compartment. The coolant level in this tank should be kept between the two marks on the reserve tank when measured while the engine is ...