Rear window demister switchRear window demister switch - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The rear window demister switch can be operated when the engine is running.

Push the switch to turn on the rear window demister.

It will be turned off automatically in about 20 minutes. To turn off the demister within about 20 minutes, push the switch again.

The indication lamp (A) will illuminate while the demister is on.

Note

► If your vehicle is equipped with heated mirrors, when the rear window demister Note

► If your vehicle is equipped with heated mirrors, when the rear window demister switch is pressed, the outside rear-view mirrors are defogged or defrosted. Refer to “Heated mirror”.
► The demister switch is not to melt snow but to clear mist. Remove snow before use of the demister switch.
► When cleaning the inside of the rear window, use a soft cloth and wipe gently along the heater wires, being careful not to damage the wires.
► Do not allow objects to touch the inside of the rear window glass, damaged or broken wires may result.

    See also:

    Radio data system (RDS)
    1- PWR (On-off) switch 2- TP (Traffic program) button 3- PTY (Program type) button 4- U/M/L (UKW/MW/LW selection) button 5- TUNE/SEEK (Down-step/Downseek) button 6- TUNE/SEEK (Up-step/Up-seek) b ...

    Power steering fluid
    To check the fluid level Check the fluid level in the reservoir while the engine is idling. Check to make certain that the power steering fluid level is always between the “MAX” and “MIN” ...

    How to connect a USB memory device
    1. Park your vehicle in a safe place and turn the ignition switch to the “LOCK” position. 2. Open the USB input terminal cover (A) in the glove box. 3. Connect a commercially available USB c ...