To apply the parking brake
1- Firmly depress and hold the brake pedal, then pull the lever up without pushing the button at the end of hand grip.
Caution
► When you intend to apply the parking brake, firmly press the brake pedal to bring the vehicle to a complete stop before pulling the parking brake lever. Pulling the parking brake lever with the vehicle moving could make the rear wheels lock up, thereby making the vehicle unstable.
It could also make the parking brake malfunction.
Note
► Apply sufficient force to the parking brake lever to hold the vehicle stationary
after the foot brake is released.
► If the parking brake does not hold the vehicle stationary after the foot brake
is released, have your vehicle checked immediately.
See also:
Bonnet
To open
Pull the release lever towards you to unlock the bonnet.
Raise the bonnet while pressing the safety lock.
NOTE Only open the bonnet when the wipers are in the parked position. Failure
...
Setting of door and tailgate unlock function (Except for vehicles equipped
with
a Dead Lock System)
The door and tailgate unlock function can be set to the following two conditions.
Each time the door and tailgate unlock function is set, a chime will sound to
tell you the condition of the door an ...
On a snow-covered or frozen
► When driving on a snow-covered or frozen road, it is recommended that you use
snow tyres or tyre chains. Refer to the “Snow tyres” and “Tyre chains” sections.
► Avoid high-spe ...