Enrollment commands

See also:
Spot lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly
and pry gently to remove the lens.
Remove the bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the ...
Twin Clutch SST control mode display
When the ignition switch is turned to the “ON” position, the currently selected
control mode is displayed on the multi-information display.
...
Wheel covers
To removeWrap the tip of the jack bar with a cloth, insert it deeply into
the notch provided in the wheel cover, and pry the cover away from the wheel. Using
the same procedure at the other wheel ...
