Tools and jackTools and jack - For emergencies - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Storage

The tools and jack are stowed in the luggage compartment.

The storage location of the tools and jack should be remembered in case of an emergency.

1- Tools

1- Tools
2- Jack

Tools

1- Tool case

1- Tool case
2- Wheel nut wrench
3- Jack bar
4- Towing hook

Jack

Before removing the jack, lift up the board.

To remove

Turn the shaft end (1) so that the jack retracts and detach it from fixing bracket (A).

To store

Turn the shaft end (2) by hand to expand the jack until it is secured firmly in position.

How to change a tyre

    See also:

    Average speed
    For vehicles with MITSUBISHI genuine audio, average speed can be displayed. This value shows the average speed (in km/h or mph) since the display was reset. If you reset the display at the time ...

    Water temperature gauge
    The water temperature gauge indicates the engine coolant temperature when the ignition switch is “ON”. CAUTION If the indication needle enters the overheating zone while the engine is runn ...

    To unlock the doors and rear hatch
    You can select the function to unlock the doors and rear hatch either using the ignition switch position or using the selector lever position (CVT) or the gearshift lever position (Twin Clutch SST ...