Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading, each individual circuit is provided with a fuse.
There are fuse blocks in the passenger compartment and in the engine compartment.
See also:
Licence plate lamps
Remove the lens mounting screws, remove the lens, then remove the bulb by pulling
out. ...
Fuse replacement
1. Before replacing a fuse, always turn off the electrical circuit concerned
and place the ignition switch in the “LOCK” position.
2. Remove the fuse puller (A) from the inside of the fuse box ...
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the
hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch ...