Odometer/Tripmeter
The operation method is the same as when the ignition switch or the operation mode is OFF.
Refer to “Odometer/Tripmeter” for further details.
See also:
Changing the security alarm settings
It is possible to set the security alarm to the “active” mode or “inactive” mode.
Follow the procedure below.
1. Except for vehicles equipped with the keyless operation system, remove the
...
Tips for starting
(1) Do not operate the starter motor continuously for anything longer than 10
seconds; doing so could run down the battery. If the engine does not start, turn
the ignition switch back to “LOCK ...
Seat belt inspection
► Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if it is defective.
► A dirty belt should be cleaned with neutra ...