Front fog lamp switchFront fog lamp switch  - Fog lamp switch - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

The front fog lamps can be operated while the headlamps or tail lamps are on. Turn the knob in the “ON” direction to turn on the front fog lamps. An indication lamp in the instrument cluster will also come on. Turn the knob in the “OFF” direction to turn off the front fog lamps. The knob will automatically return to its original position when you release it.

NOTE

• The front fog lamps are automatically turned off when the headlamps or tail NOTE

• The front fog lamps are automatically turned off when the headlamps or tail lamps are turned off. To turn the front fog lamps on again, turn the knob in the “ON” direction after turning on the headlamps or tail lamps.

• Do not use fog lamps except in conditions of fog, otherwise excessive lamp glare may temporarily blind oncoming vehicle drivers.

    See also:

    Seat belts
    To protect you and your passengers in the event of an accident, it is the most important that the seat belts are worn correctly when you drive. The front seat belts have pre–tensioners. These bel ...

    Lamps (headlamps, fog lamp, etc.) auto-cutout function
    • If the following operation is performed while the lamp switch is in the position, the lamps will automatically go out when the driver’s door is opened. [Except for vehicles equipped with ke ...

    Position lamps (for vehicles equipped with high intensity discharge headlamps)
    1. To create enough work space, turn the steering wheel all the way in the direction opposite to the side you wish to replace. 2. Remove the clips (A) and screws (B) to turn up the cover (C). ...