Mitsubishi Outlander

See also:

Roof drip moulding
When installing the roof carrier, remove the roof drip moulding caps. 1. Open the cover (A) and remove the screws using a Philips screwdriver. 2. Remove the caps by sliding them. After removal o ...

Lamp monitor buzzer
[When the engine was started using the key] If the driver’s door is opened when the key is in the “LOCK” or “ACC” position or removed from the ignition switch while the lamps are on, a bu ...

Normal conditions
The starting procedure is as follows : 1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake. 3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...