Mitsubishi Lancer

See also:

Setting the system
Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignitio ...

To increase the set speed
There are 2 ways to increase the set speed. Auto–speed control le Pull up the auto–speed control lever. And hold it until you reach the higer speed you want. Release the lever when the desir ...

Replacement of lamp bulbs
Before replacing a bulb, ensure the lamp is off. Do not touch the glass part of the new bulb with your bare fingers; the skin oil left on the glass will evaporate when the bulb gets hot and the va ...