GalleryGallery  - Mitsubishi Lancer

    See also:

    Changing the mode selection
    To change the position and amount of air flowing from the ventilators, turn the mode selection dial. (Refer to “Mode selection dial”.) These symbols are used in the next several illustrations ...

    Wheel condition
    1- Location of tread wear indicator 2- Tread wear indicator Check the tyres for cuts, cracks and other damage. Replace the tyres if there are deep cuts or cracks. Also check each tyre for pieces ...

    Stop and tail lamps and rear turn-signal lamps
    1. Insert a straight blade (or minus) screwdriver with the end covered with a cloth or other object at the edge of the cover and pry gently to remove the cover. 2. Remove the socket and bulb asse ...