Operation of the Dead Lock SystemOperation of the Dead Lock System - Keyless entry system - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller. (Refer to “Dead Lock System”.)

    See also:

    High–mounted stop lamp
    Hatchback Place the groove of clip top as shown, then remove the cover. Undo bolts (A), remove the lamp body, and disconnect the connector. Undo screws (B) and take the bulb out of its socket ...

    Combination headlamps, dipper and turn signal switch
    Headlamps Rotate the switch to turn on the lamps. –All lamps off –Position, tail, licence–plate, and instrument panel lamps on –Headlamps on and other lamps remain on Lamp monitor ...

    To turn from “ACC” to “LOCK”
    1. [Vehicles equipped with M/T] Push the emergency key in at the “ACC” position and keep it depressed until it is turned to the “LOCK” position, and remove it. [Vehicles equipped with CVT ...