Cruise control switchesCruise control switches  - Cruise control - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

A- “ON OFF” switch

A- “ON OFF” switch

Used to turn on and off the cruise control.

B- “COAST SET” switch

Used to reduce the set speed and to set the desired speed.

C- “ACC RES” switch

Used to increase the set speed and to return to the original set speed.

D- “CANCEL” switch

Used to deactivate the set speed driving.

► When operating the cruise control switches, press the cruise control switches Note

► When operating the cruise control switches, press the cruise control switches correctly.
The set speed driving may be deactivated automatically if two or more switches of the cruise control are pressed at the same time.

    See also:

    Front fog lamps (Type 2)
    1. Remove the screw (A). 2. Pull the cover out in the direction of the arrow shown in the illustration. 3. Remove the screws (B) and pull the entire lamp unit out. Note ► When unfaste ...

    System preparation mode (approx. 20 seconds)
    (The buzzer sounds intermittently and the security indicator (A) blinks.) The system preparation time extends from the point at which all of the doors and rear hatch are locked by pressing the LO ...

    Waxing
    Waxing the vehicle will help prevent the adherence of dust and road chemicals to the paintwork. Apply a wax solution after washing the vehicle, or at least once every three months to assist displa ...