To tune the radio
Automatic tuning
After pressing the SEEK button (5 or 6), a receivable station will be automatically selected and reception of the station will begin.
Manual tuning
The frequency changes every time the TUNE switch (4) is turned. Turn the switch to select the desired radio broadcasting station.
See also:
Dipper (High/Low beam change)
When the lamp switch is in the position,
the beam changes from high to low (or low to high) each time the lever is pulled
fully (1). While the high beam is on, the high-beam indication lamp in th ...
If your vehicle is to be towed by another vehicle
1. Take out the towing hook, wheel nut wrench and jack bar. (Refer to “Tools
and jack”.)
2. Cover the tip of the jack bar with a cloth, then use it to remove the cover
(A) that is located on ...
Front fog lamps
Remove the cover mounting screw.
Remove bolts (1) and (2) with a screwdriver, and pull the lamp body towards you.
NOTE
Do not turn the aiming adjusting bolt (3).
Remove the connector secured ...
