Replacing vanity mirror lamp (Bulb type)Replacing vanity mirror lamp (Bulb type) - Light bulbs - Maintenance - Kia Sportage - Fifth generation (NQ5) - (2022-2023) - Owner's Manual - Kia Sportage - 5 generation (NQ5)

Replacing vanity mirror lamp (Bulb type)

WARNING

Interior lamps

Prior to working on the Interior lamps, ensure that the "OFF" button is depressed to avoid burning your fingers or receiving an electric shock.

  1. Turn off vehicle and disconnect the negative terminal from the battery.
  2.  Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
  3. Remove the bulb by pulling it straight out.
  4. Install a new bulb in the socket.
  5. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.

Replacing glove box lamp (Bulb type)

Replacing glove box lamp (Bulb type)

WARNING

Interior lamps

Prior to working on the Interior lamps, ensure that the "OFF" button is depressed to avoid burning your fingers or receiving an electric shock.

  1. Turn off vehicle and disconnect the negative terminal from the battery.
  2. Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
  3.  Remove the cover from the lamp assembly.
  4. Remove the bulb by pulling it straight out.
  5. Install a new bulb in the socket.
  6. Install the cover to the lamp assembly.
  7. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.

Replacing luggage lamp (Bulb type)

Replacing luggage lamp (Bulb type)

WARNING

Interior lamps

Prior to working on the Interior lamps, ensure that the "OFF" button is depressed to avoid burning your fingers or receiving an electric shock.

  1. Turn off vehicle and disconnect the negative terminal from the battery.
  2.  Using a flat-blade screwdriver, gently pry the lamp assembly from interior.
  3. Remove the cover from the lamp assembly.
  4. Remove the bulb by pulling it straight out.
  5. Install a new bulb in the socket.
  6. Install the cover to the lamp assembly.
  7. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.

Replacing lights (LED type)

If the LED lamp does not operate, have your vehicle checked by an authorized Kia dealer. The LED lamp cannot be replaced as a single component because it is an integrated unit. The LED lamp has to be replaced with the unit.

A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.

    See also:

    If the vehicle breaks down
    If the vehicle breaks down on the road, move it to the shoulder and turn on the hazard warning flashers and set up a warning triangle, flashing lamp, etc. Refer to “Hazard warning flasher switchâ ...

    Radio control panel and display
    1- PWR (On-Off) switch 2- AM/FM (FM/MW/LW selection) button 3- FM (FM1/FM2/FM3) indicator 4- ST (Stereo) indicator 5- Memory select buttons 6- TUNE switch 7- SEEK (Up-seek) button 8- SEEK (Do ...

    Modification / alterations to the electric or fuel systems
    MITSUBISHI has always manufactured safe, high quality vehicles. In order to maintain this safety and quality, it is important that any accessory that is to be fitted, or any modifications carried ...