Dynamic qualityDynamic quality  - Overview - Mitsubishi ASX

Inside, the concept of sharp, sporty elegance continues with a clear emphasis on form, trim and material rather than the usual endless pursuit of fantasized SUV-ness.

Consistent with the exterior, Mitsubishi ASX's cabin reflects a clear sense of "dynamic quality" as expressed through the hooded meter cluster shared with Outlander, the soft padding around the center instrument panel itself extending to the door trim or the carefully applied silver accents either side of the audio system or along the door panels.

At the same time, items such as the chromed round module circling the shift lever, the motorbike inspiration for both the silver accents either side of the console and for the meters.

Logically, the texturing and materials were chosen to achieve the same right touch and appearance. Although the interior color scheme is based on a black monotone, contrasting use of textures and materials was made to generate dynamism.

In this respect, particular attention was paid to the soft trim for areas touched by the occupants. This led to the development of a new type of two-tone textured padding with contrastive undulations for a smart, sporty feel.

The same approach prevailed for the seat upholstery where Mitsubishi designers and their partners of the textile industry created a new embossed woven material to add to the overall sense of sporty dynamic quality, while adding visual 3D drama to the understated black interior.

    See also:

    To play tracks from a Bluetooth® device (vehicles with Bluetooth® 2.0 interface)
    You can wirelessly connect a digital audio player or cellular phone supporting Bluetooth® to listen to the tracks on the connected device. Refer to “Bluetooth® 2.0 interface” for the connecti ...

    Changing the display language
    The language of the multi-information display can be switched. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu sc ...

    Procedure for replacing the remote control switch battery
    1. Remove the screw (A) from the remote control switch. 2. With the MITSUBISHI mark facing you, insert the cloth covered tip of a straight blade (or minus) screwdriver into the notch in the remot ...