Hazard warning flasher switchHazard warning flasher switch - Instruments and controls - Mitsubishi Carisma Owner's Manual - Mitsubishi Carisma

Use the hazard warning flasher switch when the vehicle has to be parked on the

Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency.

The hazard warning flashers can always be operated, regardless of the position of the ignition key.

Push the switch to turn on the hazard warning flashers; push the switch again to turn them off.

When this switch is operated, all turn-signal lamps flash continuously, as do the turn-signal indication lamps in the instrument cluster.

CAUTION

If the lamps are kept flashing for a long time, the battery will be discharged, resulting in hard engine starting or no start condition at all.

    See also:

    Auto–speed (cruise) control*
    Auto–speed control is an automatic speed control system to maintain a desired driving speed of about 40 km/h or more without operating the accelerator pedal. This feature is especially useful f ...

    To temporarily increase or decrease the speed
    To temporarily increase the speed Depress the accelerator pedal as you would normally. When you release the pedal, you will return to your set speed. Note ► In some driving conditions, th ...

    Average fuel consumption display
    This displays the average fuel consumption from the last reset to the present time. There are the following 2 mode settings. For information on how to change the average fuel consumption display s ...