Operating the system as a manual air conditioning
If you operate the blower speed selection dial or the mode selection dial as you desired, the system is still automatically controlled except selected function which dial is operated. To return all operations to automatic operation, set the dials to “AUT” (AUTO) position.
See also:
Removal of water from the fuel filter (diesel-powered vehicles only)
When water has accumulated in the fuel filter, remove the water as described
below.
1. Place a drainage tray under the filter. 2. Connect a hose to the drain plug
(A) and let it hang down into ...
Check engine warning lamp
This lamp is a part of an onboard diagnostic system which monitors the emissions,
engine control system or CVT control system/Twin Clutch SST control system.
If a problem is detected in one of th ...
To decrease the set speed
There are 2 ways to decrease the set speed.
“COAST SET” switch
Press and hold the “COAST SET” switch (B) while driving at the set speed, and
your speed will slow down gradually.
When you ...