Power steering fluid
Check the fluid level in the reservoir while the engine is idling.
Unscrew the reservoir cap; the level in this tank should be kept between the “MAX” and “MIN” lines.
Use “ATF DEXRON II”.
See also:
Fuse replacement
1. Before replacing a fuse, always turn off the electrical circuit concerned
and place the ignition switch in the “LOCK” position.
2. Remove the fuse puller (A) from the inside of the fuse box ...
Using the MIVEC engine
The MIVEC engine automatically switches its intake- valve control between a low-speed
mode and a high-speed mode in accordance with driving conditions for maximum engine
performance.
NOTE
• T ...
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2 ...