Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after a heavy snowfall so that the operation of the heating and ventilation systems will not be impaired.
See also:
Front turn-signal lamps
1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper
cover (D).
2. Remove the entire socket and bulb assembly (E) by turning it anticlockwise.
: Front of the vehicle ...
Heater/Manual air conditioning*
The heater and the air conditioning can be operated while the engine is running.
The performance of the heater is directly related to the temperature of the engine
coolant, so operate the heater ...
Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch
SST control mode switch (A) to change the control mode.
When the engine is started, the control mode is automatic ...