Operation of the Dead Lock System
In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller.
(Refer to “Dead Lock System”.)
See also:
What to do if the engine speed becomes unstable after the battery is replaced
If the engine speed becomes unstable after the battery is replaced, reset the
engine using the following method:
1. Stop the vehicle in a safe place. 2. Place the gearshift lever (manual transmissi ...
Checking battery electrolyte level
The electrolyte level must be between the “max” and “min” marks stamped on the
outside of the battery. Replenish with distilled water as necessary.
The inside of the battery is divided in ...
Tips for starting
► Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “LOCK”, wait a ...
