Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor switch)Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor 
switch)  - Keyless entry system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To fold

Within 30 seconds of locking the doors and rear hatch using the LOCK switch (1), press the LOCK switch twice rapidly to fold the outside rear-view mirrors.

To extend

Within 30 seconds of unlocking the doors and rear hatch using the UNLOCK switch (2), press the UNLOCK switch twice rapidly to return the outside rear-view mirrors to their extended positions.

The outside rear-view mirrors are not initially set to work as described above. If you want them to work as described above, you need to set them so that they do not retract/extend when the doors and rear hatch are locked/unlocked using the keyless entry system or keyless operation system. Refer to “Starting and driving: Outside rear-view mirrors”.

For details, please consult a MITSUBISHI MOTORS Authorized Service Point.

In a vehicle equipped with the MITSUBISHI Multi- Communication System (MMCS), it is possible to change the setting by means of screen operations.

Refer to the separate owner’s manual for details.

► The keyless entry system does not operate in the following conditions: • The Note

The keyless entry system does not operate in the following conditions: • The key is left in the ignition switch.
• The door or rear hatch is open.

► The remote control switch will operate within approximately 4 m from the vehicle. However, the operating range of the remote control switch may change if the vehicle is located near a power station, or radio/TV broadcasting station.

► If either of the following problems occurs, the battery may be exhausted.

• The remote control switch is operated at the correct distance from the vehicle, but the doors and rear hatch are not locked/unlocked in response.
• The indication lamp (3) is dim or does not come on.

For further information, please contact your MITSUBISHI MOTORS Authorized Service Point.

If you replace the battery yourself, refer to “Procedure for replacing the remote control switch battery”.

► If your remote control switch is lost or damaged, please contact your MITSUBISHI MOTORS Authorized Service Point for a replacement remote control switch.

► If you wish to add a remote control switch, please contact your MITSUBISHI MOTORS Authorized Service Point.

A maximum of 8 remote control switches are available for your vehicle.

    See also:

    Battery
    The condition of the battery is very important for quick starting and to keep the vehicle’s electrical system working properly. Regular inspection and care are especially important in cold weath ...

    Capacities
    ...

    Warning for obstacles
    If there is an obstacle behind the vehicle, a warning will be issued with the information screen in the multi-information display and a warning buzzer. 1- Corner sensor (left) 2- Back sensor 3- ...