Door ajar prevention systemDoor ajar prevention system  - Warning activation - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

When the ignition switch is in the “LOCK” (PUSH OFF) position, if you try to

When the ignition switch is in the “LOCK” (PUSH OFF) position, if you try to lock the doors and rear hatch by pressing the driver’s or front passenger’s door lock/unlock switch, or the rear hatch LOCK switch with one of the doors or the rear hatch not completely closed, a warning is issued with the warning display and the buzzer buzzing for about 3 seconds and you cannot lock the doors and rear hatch.

    See also:

    Changing the security alarm settings
    It is possible to set the security alarm to the “active” mode or “inactive” mode. Follow the procedure below. 1. Turn the ignition switch to the “LOCK” position. If you started the engi ...

    Vehicle labeling
    Vehicle identification number The vehicle identification number is stamped on the bulkhead as shown in the illustration. Vehicle information code plate The vehicle information code plate is riv ...

    Operating the system in automatic mode
    In normal conditions, use the system in the AUTO mode and follow these procedures: 1. Set the blower speed selection dial to the “AUTO” position. 2. Set the temperature control dial to the de ...