Dead Lock SystemDead Lock System  - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The Dead Lock System helps to prevent theft.

When the keyless entry system or the keyless operation function has been used to lock all of the doors and rear hatch, the Dead Lock System makes it impossible to unlock the doors using the inside lock knobs.

► Do not set the Dead Lock System when someone is inside the vehicle. With Caution

► Do not set the Dead Lock System when someone is inside the vehicle. With the Dead Lock System set, it is not possible to unlock the doors using the inside lock knobs. If you erroneously set the Dead Lock System, unlock the doors using the UNLOCK switch on the remote control switch or using the keyless operation function.

See also:

Normal conditions
The starting procedure is as follows : 1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake. 3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...

Changing the mode selection
To change the position and amount of air flowing from the ventilators, turn the mode selection dial. (Refer to “Mode selection dial”.) These symbols are used in the next several illustrations ...

Anti-theft lock
The anti-theft lock is located on the top of the rear seatback. The cylinder is operated with the master key (A). When the lock is in the “LOCK” position, the seatback cannot be folded down b ...