Engine coolant temperature displayEngine coolant temperature display  - Multi-information display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This indicates the engine coolant temperature.

This indicates the engine coolant temperature.

If the coolant becomes hot, blink. will blink.

Pay careful attention to the engine coolant temperature display while you are driving.

► If the engine is overheating, Caution

► If the engine is overheating, graph is on the red zone.will blink. In this case, the bar graph is on the red zone.
lmmediately park the vehicle in a safe place and take the required measures. Refer to “Engine overheating”.

    See also:

    Rear room lamp
    The room lamp can be turned on by sliding the room lamp switch. 1 (ON) - The room lamp goes on. 2 ( ) - The lamp illuminates when a door or the rear hatch is opened. It goes off about 15 seconds ...

    Audio system anti-theft feature
    To prevent theft of the audio system, the control panel can be removed. Always remove the control panel when you leave the vehicle. Removing the control panel Turn the ignition switch to the OFF ...

    Cancelling the alarm
    It is possible to halt the activation of an alarm using the following methods: ► Pressing the LOCK or UNLOCK switch on the remote control switch. (After pressing the LOCK switch, the vehicle ...