Modification / alterations to the electric or fuel systems
MITSUBISHI has always manufactured safe, high quality vehicles. In order to maintain this safety and quality, it is important that any accessory that is to be fitted, or any modifications carried out which involve the electric or fuel systems, should be carried out in accordance with MITSUBISHI guidelines.
CAUTION
Please consult an authorized MITSUBISHI dealer concerning any such fitment or modification. If the wires interfere with the vehicle body or improper installation methods are used (protective fuses not included, etc.), electronic devices may be adversely affected, resulting in a fire or other accident.
See also:
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2 ...
SRS warning lamp
There is a supplemental restraint system (“SRS”) warning lamp on the instrument
panel. The system checks itself and the lamp tells you if there is a problem. When
the ignition key is turned ...
Interior lamps
1- Luggage room lamp
2- Room lamp (rear)*
3- Map & room lamps (front) Sunshade illumination dimming control switch*
NOTE
• If you leave the lamps on without running the engine, you will r ...
