Folding the seat (Hatchback)
1. Remove the rear shelf panel and rear head restraints.
Refer to the description
of “Rear shelf panel” on page NO TAG and “Head restraints” on page 3–7.
2. Pull the band (between the seat cushion and seatback) to raise the seat cushion.
NOTE
After raising the seat cushion, lay the head restraints, removed from the rear seat, on the floor as shown in the illustration.
3. Push the button to fold the seatback.
See also:
Headlamps (high/low beam, for vehicles with high intensity discharge headlamps)
Do not attempt to disassemble or repair headlamps, and do not attempt to replace
their bulbs.
Warning
► A high voltage is present in the power circuit and in the bulbs and bulb
terminals. ...
Testing the system
Open all of the door windows, then set the Dead Lock System. (Refer to “Setting
the system”.) After setting the Dead Lock System, reach into the vehicle
through a window and confirm that you c ...
Error codes (iPod)
Vehicles with Link System
If an error code (1) appears in the display, take action in accordance with the
table below.
...