Adjusting head restraint forward or backward (Front seat only)

Tilt the head restraint forward to adjust it forward. To adjust it backward, tilt the head restraint backward.
See also:
Setting the system
1. Turn the ignition switch to the “LOCK” position.
Also, if a key was used to start the engine, remove the key from the ignition
switch.
2. Get out of the vehicle. Close all doors and rear ha ...
Seat belt inspection
(1) Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if defective. (2) A dirty belt should
be cleaned with neutral detergent i ...
Towing
Caution
► When towing the vehicle with only the front wheels or only the rear wheels
raised off the ground, do not place the ignition switch in the “ON” position. Placing
the ignition ...
