Rheostat (meter illumination control)Rheostat (meter illumination control) - Instruments and controls - Mitsubishi Carisma Owner's Manual - Mitsubishi Carisma

The rheostat can be adjusted while the lamp switch is “”

The rheostat can be adjusted while the lamp switch is “or “”. Turn the dial to adjust the meter” or “illumination to the desired brightness.”. Turn the dial to adjust the meter illumination to the desired brightness.

1- To increase brightness
2- To reduce brightness

    See also:

    Accessory socket
    The accessory socket can be used while the ignition switch is in the “ON” or “ACC” position. Caution ► Be aware that using electronic equipment with the engine off may run the bat ...

    Exterior
    1. Electric window control 2. Fuel tank filler p. 03 3. Outside rear-view mirror Side turn-signal lamps* 4. Side turn-signal lamps* 5. Position lamps 6. Headlamps, low beam 7. Front fog l ...

    ACC power auto-cutout function
    After about 30 minutes has elapsed with the ignition switch in the “ACC” position, the function automatically cuts out the power for the audio system and other electric devices that can be ope ...