Driving hints
(1) TCL does not actively apply brakes. Always decelerate the vehicle sufficiently
before entering corners or bends.
(2) On snowy or icy roads, drive slowly using
tyre chains or snow tyres.
(3) When the TCL indication lamp illuminates, SLIP
control is being operated, and it means that the road is slippery or your vehicle
is excessively accelerating. In this situation, release foot from the accelerator
pedal and maintain moderate speed.
(4) Never mix or use tyres of different size
since the TCL system could function incorrectly and make safe driving difficult.
See also:
To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control lever until you reach the lower speed
you want. Release the lever when the desire ...
Changing the fuel consumption display unit
The display unit for fuel consumption can be switched.
The distance, speed, and amount units are also switched to match the selected
fuel consumption unit.
1. Press and hold the multi-information ...
Coming home light
This function turns on the headlamps in the low beam setting for about 30 seconds
after the ignition switch is turned to the “LOCK” position.
1. Turn the combination headlamps and dipper switch ...