GalleryGallery - Mitsubishi Carisma

    See also:

    Exterior and interior lamp operation
    Operate the combination lamp switch to check that all lamps are functioning properly. If the lamps do not illuminate, the probable cause is a blown fuse or defective lamp bulb. Check the fuses fir ...

    ACD control mode switch
    When the ignition switch is set to the “ON” position, operate the AWC switch to change the control mode. Each time the switch is pushed, the control mode changes in the order “TARMAC”  ...

    Rear fog lamp
    1. Remove the socket and bulb assembly by turning it anticlockwise. 2. Remove the bulb by pulling it out. 3. To install the bulb, perform the removal steps in reverse. ...