To find the start of a desired track
The start of each track on a disc can be found by using the
or
button (7 or 8).
Track up:
Press the button (8) the number
of tracks to skip over.
The frequency-display window will display the number of tracks thus selected.
Track down:
Press the button (7) the number
of tracks to skip over.
The frequency-display window will display the number of tracks thus selected.
See also:
Change of air selection
Every time the air selection switch is pressed, alteration is made between outside
air introduction and inside air recirculation. When inside air is recirculated,
the indicator lamp (A) comes on ...
Parking
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on
an uphill) or reverse (on a downhill) position on manual transmission vehicle. On
automatic transmi ...
To remove the spare tyre
1. Lift up the board.
2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise.
Note
► Put the spare wheel under the vehicle body near the jack. This make ...