UKW/MW/LW electronic tuning radio with CD player*

The audio system can be used when the ignition switch is in the “ON” or “ACC” position.
A– Display window
B– Audio system
NOTE
(1) The MITSUBISHI Genuine CD autochanger can be connected to this audio system.
The CD autochanger can be operated by the switch on the audio body. Refer to “To
listen to a CD autochanger” on page 6–24.
(2) To listen to the audio system while
the engine is stopped, turn the ignition switch to the “ACC” postion.
(3) When
a cellular phone is used inside the vehicle, noise may be produced from the audio
equipment. This does not mean that something is wrong with the audio equipment.
In such a case, use the cellular phone at a place as far as possible from the audio
equipment.
(4) In case of misuse (entry of a foreign object or water, smoke or
odour, etc.), immediately stop the operation and have the audio system checked at
an authorized MITSUBISHI dealer. Never try to repair it by yourself. Avoid continuous
usage without inspection by a qualified person.
(5) The audio system’s control
panel can be removed to deter thieves. For details, refer to section entitled “Audio
system anti-theft feature” on page 6–26.
See also:
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT ...
To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control lever until you reach the lower speed
you want. Release the lever when the desire ...
Caution for installing the child restraint on vehicles with a front passenger
airbag
The label shown here is attached on vehicles with a front passenger airbag.
Warning
► Extreme Hazard!
Do not use a rearward facing child restraint on a seat protected by an airbag in
fro ...
