How to repeat the same track
You can repeatedly listen to the same track by pressing the RPT button (10).
Press the RPT button, and the RPT indicator (15) will come on.
To release, press the button again.
How to use the SCAN button
Use the SCAN button (9) to search for a particular track, etc. When this button is pressed, the first 10 seconds of each track on the disc will be played.
The disc will advance at fast-forward speed between each 10-second played in this way. Press the SCAN button again, to play the track ordinary. After completion of this scanning of tracks, the disc will begin ordinary play.
To change the order of tracks played back (For CD player)
Press the RDM button (11), and the RDM indicator (16) will illuminate and will be randomly selected, tracks for playback. To release, press the button again.
To change the order of discs played back (For CD autochanger)
Press the RDM button (11), and the RDM indicator (16) will illuminate and tracks for playback will be selected randomly from all discs loaded into the changer.
To release, press the button again.
See also:
Possible driving speed
Avoid shifting down at high speed, as this may cause excessive engine speed (the
tachometer needle into the red zone) and damage the engine.
Petrol-powered vehicles without MIVEC engine
Use 5 th ...
Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra ...
Chrome parts
In order to prevent spots and corrosion of chrome parts, wash with water, dry
thoroughly, and apply a special protective coating. This should be done more frequently
in winter. ...
