Mitsubishi Lancer

See also:

Changing the turn-signal sound
It is possible to change the turn-signal sound. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen. Refer to ...

Range of view of rear-view camera
The range of view of the rear-view camera is limited to the area shown in the illustrations. It cannot show both sides and the lower part of the rear bumper, etc. When reversing, be sure to visua ...

Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...