Mitsubishi Lancer

See also:

Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...

Door ajar warning display screen (when the ignition switch is “ON”)
If any of the doors or the rear hatch is not completely closed, this displays the open door or rear hatch. If the vehicle speed exceeds approximately 8 km/h (5 mph) while a door is ajar, a buzz ...

To remove the spare tyre
1. Lift up the board. 2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise. Note ► Put the spare wheel under the vehicle body near the jack. This make ...