Cleaning the inside of your vehicle
After cleaning the inside of your vehicle with water, cleaner or similar, wipe and dry in a shady, well-ventilated area.
NOTE
Always read the instructions on the cleaner label.
See also:
Sedan
Place the grove of clip top as shown, then remove the cover.
Remove the bulb from the socket by turning it anticlockwise while pressing it
inward. ...
Lamp monitor buzzer
[When the engine was started using the key]
If the driver’s door is opened when the key is in the “LOCK” or “ACC” position
or removed from the ignition switch while the lamps are on, a bu ...
Replacement of lamp bulbs
Before replacing a bulb, ensure the lamp is off. Do not touch the glass part
of the new bulb with your bare fingers; the skin oil left on the glass will evaporate
when the bulb gets hot and the va ...
