Aluminium wheels
A protective coating is provided over the aluminium type wheels.
Clean aluminium wheels with a cleaner designed for use on aluminium and apply an appropriate protection agent.
NOTE
(1) When cleaning aluminium type wheels, do not use abrasive cleaners. Wheels
exposed to sea water or road chemicals should be cleaned as soon as possible.
(2) Brushes may damage the aluminium wheel surface. Always use a sponge, chamois
leather, etc.
(3) Do not apply hot water directly from the steam cleaner or similar
to the wheel surface.
See also:
Headlamps (high/low beam, for vehicles with high intensity discharge headlamps)
Do not attempt to disassemble or repair headlamps, and do not attempt to replace
their bulbs.
Warning
► A high voltage is present in the power circuit and in the bulbs and bulb
terminals. ...
Setting the system
1. Turn the ignition switch to the “LOCK” position.
Also, if a key was used to start the engine, remove the key from the ignition
switch.
2. Get out of the vehicle. Close all doors and rear ha ...
Except for vehicles equipped with Twin Clutch SST
Always stop the vehicle in a safe place before operating.
The following information is included on the multi-information display: warnings,
odometer, tripmeter, service reminder, engine coolant tem ...