Selection of engine oil (diesel-powered vehicles)

(1) Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
(2) Use engine oil conforming to the following classification:
Type 1:ACEA classification: “For service B2-96 or B3-96”
Type 2:API classification:
“For service CF”
NOTE
Use of additives is not recommended since they may reduce the effectiveness of additives already included in the engine oil. It may result in failure of the mechanically assembly.

See also:
Warning lamp
The ABS warning lamp should illuminate when the ignition switch is turned ”ON”,
and should go off in a few seconds.
CAUTION
If the warning lamp stays on or does not illuminate when you start ...
Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Rear window demister switch
NOTE
• On vehicles with ...
Average speed
For vehicles with MITSUBISHI genuine audio, average speed can be displayed. This
value shows the average speed (in km/h or mph) since the display was reset. If you
reset the display at the time ...
