Chassis number

The chassis number is stamped on the bulkhead as shown in the illustration.
See also:
Jacking up 4-wheel drive vehicles
Warning
► Do not crank the engine while jacking up the vehicle.
The tyre on the ground may turn and the vehicle may roll off the jack. ...
Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch
SST control mode switch (A) to change the control mode.
When the engine is started, the control mode is automatic ...
Automatic mode
The automatic adjustment mode can set the local time automatically by using the
signal from local RDS stations. In this mode, CT (A) is shown in the display. Refer
to “Radio data system (RDS)” ...
