Engine number
The engine number is stamped on the engine cylinder block as shown in the illustration.
A- Front of the vehicle
See also:
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2 ...
To deactivate
The Auto Stop & Go (AS&G) system is automatically activated when the ignition
switch is turned to the “ON” position. You can deactivate the system by pressing
the “Auto Stop & Go ...
On a flooded road
► Avoid flooded roads. Water could enter the brake discs, resulting in temporarily
ineffective brakes. In such cases, lightly depress the brake pedal to see if the
brakes operate properly.
...